Monday, 17 September 2012

Resolving Replacment UPVC Door Handles Issues

UPVC door handles will often stop working and there are a variety of reasons as to why, but this problem can often be very frustrating and sometimes expensive to fix. However, if you are attempting to fix it yourself then we have put together a mini guide to help you out.

One of the main causes for why replacement door handles are needed is due to general wear and tear. Like most things these handles won't last forever and excessive use can shorten the handles durability, as they can often become difficult to turn and unlatch. As well as this, there can be problems with the lock in uPVC doors, and the deadbolt can become stuck, making it difficult to open the door.

Such problems can be caused by a range of things, including the following:
•    Screws that are too tight can result in the handle’s backplate pinching the lock, thereby preventing the spring from working effectively

•    The handle’s internal springs may bind against the inside of the handle backplate if they’re not properly lubricated

•    Sometimes, the handle is prevented from operating properly if there is insufficient clearance behind the handle’s backplate, stopping it from turning freely

•    The spring mechanism can fail within the lock or lever handle

There are a number of ways to resolve such problems, including removing and cleaning the door handle itself, but this isn’t always necessary.  Instead, why not try some of the following tips to get your door handle working again:

•    Try slightly loosening the screws that hold the handle to the door itself.  This should make the handle easier to turn.

•    Remove the handle from the door and operate it while holding the backplate.  If the handle does not operate freely, try adding a little grease to it and allowing it to work into the mechanism.  This should stop the mechanism from binding, and the handle can be fitted to the door again.

•    If the door isn’t latching shut properly, it’s likely that the spring mechanism within the lock has failed.  To test if this is the case, remove the latch from the door and try pressing it with your finger; if it doesn’t spring back fully or is very slow when doing so, you’ll need to replace it.

There are number of tips available when it comes to repairing or replacing door handles, and should you find that you need to replace specific parts – or the handle itself – on internal doors or uPVC doors, Doorfit have a huge range of door fittings, locks and mechanisms from all the major manufacturers, including Avocat and ERA, among others.

UPVC door handlesreplacement door handle

Our dedicated team will be more than happy to give you advice about the best way to repair or replace your door handle, and will be delighted to show you the most suitable products for your particular needs. So why not take a look today to see how Doorfit can help you.


Tuesday, 4 September 2012

Abus Padlocks Keeping You Secure

Having over fifty years experice in the industry ABUS are at the forefront of padlock innovation. They’ve created market leading brass padlocks over the last fifty years by using the very best materials available.

Due to an increse in copper over the year ABUS have been forced to look at using different materials to make their locks. Their answer can in the form of Titalium. This lightweight and extremely durable matrerial means extra security for a weight that’s around 30% lighter than that of brass padlocks. As well as being secure, these new padlocks have an attractive, contemporary, stainless steel finish.

Abus Padlockstitianium padlockstainless steel padlock
Using this material, as well as others, ABUS has been able to continue producing first class padlocks and locks, all manufactured to the same impeccable standard as their brass padlocks.  In fact, using these new materials allows ABUS to provide a range of different padlock sizes for most security requirements, all at affordable prices.

The range of locks and fittings includes the 80TI series of padlocks, the 64TI series and the 90RK/50 shackle, all of which are manufactured to the high standard you’d expect from ABUS.

Abus logo

Each of the products produced by ABUS benefit from enhanced security systems and provide the utmost protection no matter where they’re used.  Such advantages include paracentric keyways, which provide great protection against forced or manipulative break-ins, hardened steel shackles that are highly corrosion resistant, and dual ball bearing locking mechanisms, which increase the strength of the lock by making pulling and prying more difficult.

Of course, these are just some of the advantages that the ABUS range of locks have, and it’s important that, in order to ensure that the product you use is of the best quality, it should be purchased from a reputable supplier of ABUS products.

As expert ironmongery suppliers, Doorfit have over fifity years of experience to draw on when it comes to supplying the most suitable locks and fittings for their clients’ requirements, and they’re always happy to provide advice when needed. So why not take a look today and see what Doorfit can do for  you.

Wednesday, 15 August 2012

Doorfit - Keeping You Safe At Browhills

Security is always important if you are a home or business owner. Knowing what is available and how best to achive the desired out come can often be confusing as there are so many products available on the market. A number of organisations and businesses have come together to help.




Doorfit are just one of the partner agencies who were asked by West Midlands Police to provide displays within the Community Safe House in Walsall, West Midlands. Located next to the police station this safe house has been fitted with a range of items that have specifically been designed to enhance the security of any property.

Garador garage door

The Doorfit team fitted a up and over garage door, from Garador's Guardian Range approved by Secured by Design, along with an ironmongery display board, to the property. This board featured an array of security devices ideal for both home and bsiness use.

ironmongery diplay board

All features within the house, including the up and over doors, were upgraded to the very latest standards, allowing members of the public to see and experience just what’s available today for their homes.  This included doors, windows, locks, alarms and secure external bike racks, all of which carry the police-approved Secured by Design standard.

This facility has the honour of being the first of its kind in the country, and the reported benefits of the Safe House are extensive.  Members of the public are invited to visit the facility at any time, where an officer will be present to answer any questions and discuss what’s been fitted in the property.  This makes it the ideal place for the public to get reliable crime prevention input, information and advice, straight from the police, as well as it being a superb demonstration of how to keep homes safe from burglars.

As Doofit are a highly repected supplier and installer of garage doors across Birmingham and surrounding areas, our experiened team will be more than happy to help you with any queries you may have. Why not visit our site today and see how Doorfit can help make your home or business more secure.

Thursday, 9 August 2012

olympic logo

As Olympic fever gripped the nation over the last few weeks, there’s been a huge amount of support for and pride in our athletes. Of course, every Olympic sport needs a base and somewhere for the athletes to train, One such places is Lilleshall in Shropshire, home to GB Archery.  Both the Olympic and Paralympic archery teams have been utilising the newly refurbished facilities, as well as taking advantage of the state-of-the-art equipment to analyse their shots and overall performance.

A purpose-built facility was constructed for use by the archers and in order to make the most of the facility and the benefits it brought, it was felt that sectional doors would be the most suitable choice, and the decision was made to fit Novoferm sectional garage doors iso 45.

Doorfit was chosen because they are  a leading supplier and installer of garage doors. As a result they worked closely with the site’s main contractors to provide a completely bespoke garage door solution to Lilleshall’s unusual and unique requirements.  The area had to be accessible and sheltered, as well as safe, for competitors, officials and spectators, while also maintaining high functionality.

Lilleshall is a testament to the expertise, knowledge and experience of the teams working on it, and Doorfit are no exception.  Based in Birmingham, Doorfit supply and fit all types of garage doors. They have a large showroom based in Hockley, however, they are also provide a free of charge home survey and quotation service. 

If you have any queries regarding garage doors pelase feel free to contact us and our expert staff will be more than happy to advise you. so why not take a look today and see what Doorfit can offer you.

Friday, 27 July 2012

New Soltaire Stainless Steel System By Henderson

Looking for reliable, robust, sliding door gear that is resistant to corrosion? Then look no futher, Henderson have it covered, with their range of Soltaire Stainless Steel Systems.

The Soltaire system can be used in a variety of applications and with doors of differing weights, whether you require the system for internal or external doors.  It’s also extremely durable and perfectly designed for doors in areas that experience a lot of use or high traffic, and because they’re manufactured using stainless steel, they can be safely used in properties on the coast, thanks to their resistance to corrosion.


The Soltaire Stainless Steel System is ideal for both commercial and residential use and is designed to accommodate one sliding panel or two bi-parting doors on a single track. It can also be used with multiple doors, whether they slide all to one side or to either side of the opening.  This means that external and internal doors can be manufactured using a variety of materials, including MDF, metal and timber.

Choose from 3 weight options 120, 180 and 250kg.  All Soltaire Stainless Steel System are suitable for use with doors that receive a lot of use, or on those doors in coastal properties; the only difference is the weight each system can work with, which obviously depends on the type of door and the situation it’s in.
Henderson sliding door gear
Here at Doorfit we can advise you as to which Stainless Steel System best suits your needs and budget. We have a wide range of  sliding door gear available to view at our showroom in Hockley, Birmingham.

So if you’re looking for a system for sliding or folding doors, Doorfit can help  All of our products are available across the UK, so why not get in touch to find out more?

Friday, 20 July 2012

Securfold Ultra by Henderson

As a leading manufacturer of garage door gears for both commercial and domestic use Henderson's have a brought out a new product range, the fantastic Securefold Ultra and the Soltaire Full Stainless Steel Syste.

Renowned for their chic, modern look and feel, Securefold systems have been designed specifically to enable the user to play with the space within a room by opening up exterior walls – and all without compromising on security.

For both use in commercial or domestic properties the Securefold Ultra takes this step one step futher by introducing enhanced security features for top hung, exterior, timber folding door systems.

Much of this is thanks to the materials used during construction, which includes stainless, or cast stainless, steel, anodised aluminium or polymers, meaning that all of the components are fully corrosion resistant.  This means that they can be used in almost any environment, including coastal environments.

If that’s not enough reason to consider these products, they also have a range of certifications, including burglar resistance to BSEN 1627: 2011 Class 2, and performance to BSEN 1527:1998.  As well as this, their superior security is provided by a range of features, including three point locking on every door seam, Secured by Design approved multipoint locks and enhanced security screws, all for complete peace of mind.

Of course, as they’re part of Henderson’s Securefold range, you can be sure of exceptional quality and a host of familiar benefits, with the added bonus of brilliantly designed, security enhanced components and outstanding weather resistance.  That’s because they come complete with frame, track and door seals for a superb seal whatever the weather!  As a result, they’re one of the most secure systems available today, so they’ll both look good and perform at their best for years to come.

Doorfit are delighted to provide Henderson's Securefold range throughout the UK. As one of their key suppliers of sliding door gear, our expert staff will be happy to help with any queries you may have regarding the Henderson product range. So why not see what Doorfit can do for you today?

Monday, 9 July 2012

Great Pocket Door Kits from Henderson

Over the years many manufacturers have been developing inginous ways to maximise usable space in limited surroundings. One such manufacturer is Henderson, who are renowned throughout the world for their high quality and innovative products.

Their first class sliding door gears, among other products, includes a range of pocket door kits that are the ideal solution to modern life.  Based on their most popular range of domestic kits, the sliding pocket door system is a great solution when it comes to saving space.

Unlike conventional internal swing doors, pocket door systems slide effortlessly into a specially created cavity in the adjoining wall, meaning they don’t need to swing open on hinges.  As a result, the space either side of the wall – space which would originally have been redundant – can be safely used.  Plus, when the door isn’t in use, it’s possible to completely conceal it within the wall cavity, allowing for a lighter environment and a more open plan feel.

Each pocket door kit comes complete with brackets, wood lined metal cavity wall uprights, the Husky 100 sliding system and pre-assembled track and header, as well as all necessary fixings, making it ideal for speedy, problem-free construction and installation.

Thanks to this, this type of door kit is suitable for use in a wide variety of commercial and domestic buildings, including as en-suite doors in hotel rooms, as toilet and bathroom doors and as room dividers, along with myriad other uses.  Whether a single or double door is required, and no matter what the intended material is for the door, the sliding door kit is a great choice for any modern building.

Doorfit supply pocket door kits throughout the UK, as well as offering systems for other domestic, commercial or industrial applications. So whether you have a sliding door in Solihull or a folding door in Sutton Coldfield, Doorfit and their experienced staff can give you the correct advice.

If you’d like to find out more, simply get in touch.. Alternatively, why not visit their showroom in Hockley, Birmingham, to browse through their selection of sliding door gears?